433 Mhz  Wireless Remote Universal

• Operating frequency: 433.92MHz
• Power by 2pcs 3V Coin Cell Button Battery  (Battery NOT included ),
• Material: PVC.
• Button: 2 buttons
• Size:   59mm x 28mm x 8mm;
• Operating voltage: 6V ;
• Operating Current: 12mA
• Transmitting power: 10mw
• Modulation mode: ASK (AM).
• Encoding type: Learning.
• Transfers distance: 80m

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects. Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects . Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically. Clearing the code : Method 1： Push the learning button on the receivers for 8 times , the codes will be cleaned; Method 2： Keeping press the Learning Button on the receiver until the LED indicator ON and then flash,until it flash for 8 times. it mean the code have been cleared successfully; After clearing the code, all the remote control cannot work any more.

Learning the code :(Momentary) Push the learning key on the receiver 1 time , it comes into momentary setting mode . Wait for a moment , the LED will be off , it comes into learning state . Push the remote button , LED indicator on the receiver board will flash then come off . After 3 seconds, the LED indicator will be on again , learning successfully .

Learning the code : ( Toggle ) Push the learning key on the receiver 2 times , it comes into toggle setting mode Wait for a moment , the LED will be off , it comes into learning state . Push the remote button,LED indicator on the receiver board will flash then come off. After 3 seconds , the LED indicator will be on again , learning successfully .

Learning the code 🙁 Latching ) Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”. For example : button A = ON , button B = OFF Push the learning key on the receiver 3 times , it comes into latching mode . Wait for a moment , the LED indicator on the receiver board will flash then come off. Push the remote button A . LED flash for 5 times . Push the remote button B . Led flash for 5 times . After 3 seconds , the LED indicator will be on again , learning successfully. A = ON , B = OFF .

Learning the code 🙁 Time delay mode ) Push the learning key on the receiver 4 times , the time dealy for 5 seconds . Push the learning key on the receiver 5 times , the time delay for 10 seconds . Push the learning key on the receiver 6 times , the time delay for 15 seconds . The LED indicator will be off . Push the remote button , LED flashes and off . After 3 seconds , the LED indicator will be on again , learning successfully .