Filter

ESP32 WiFi Bluetooth Development Board

Name: ESP32 WiFi Bluetooth Development Board
SKU: 4056
Price: 1600.00 KES
Availability: InStock

KSh1,600.00

In stock

SKU: 4056 Category: LCDS & Displays

Description

ESP32 WiFi Bluetooth

Introduction:ESP32 WiFi Bluetooth

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.

Peripheral interfaces:

12-bit SAR ADC up to 18 channels
2 × 8-bit DACs
10 × touch sensors (capacitive sensing GPIOs)
Temperature sensor
4 × SPI
2 × I²S interfaces
2 × I²C interfaces
3 × UART
SD/SDIO/CE-ATA/MMC/eMMC host controller
SDIO/SPI slave controller
Ethernet MAC interface with dedicated DMA and IEEE 1588 Precision Time Protocol support
CAN bus 2.0
Infrared remote controller (TX/RX, up to 8 channels)
Motor PWM
LED PWM (up to 16 channels)
Hall effect sensor
Ultra low power analog pre-amplifier

Product description:

ESP32 wroom 32 ESP32-WROOM-32 DevKitC Development Board, ESP-32, 38-pin DevKitC Layout

This is a development board for the ESP-WROOM-32 module from Expressif Systems.
A further development from the popular ESP8266 modules, this comes with both Wifi and Bluetooth.
It is supported by the Arduino IDE, and also supports Micropython and there is developing support for NodeMCU Lua.
There are different variations of these development boards available.
They offer similar capabilities but with different pinout configuration.

This listing is for the 38 (2 x 19) pin layout, sometimes called the DevKitC Development board. It measures 55mm x 29mm x 14mm.

ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
and power management module.
The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
The board has a Micro USB port onboard, soldered headers and integral antenna.
It’s well documented online, and is a very capable board, with plenty of digital and analog input/outputs.

Technical details:-

\The USB interface uses a Silicon labs CP210x chip. Drivers are required for most operating systems,