STM32F103C8T6 ARM STM32 Development Board
KSh1,000.00
STM32F103C8T6 is a very powerful Microcontroller and with its 32-bit CPU, it can easily beat Arduino UNO in performance. As an added bonus, you can easily program this board using your Arduino IDE (although with some tweaks and additional programmer i.e. USB to U(S)ART converter).
In stock
The STM32F103C8T6 board a.k.a Blue Pill is a Development board for the ARM Cortex M3 Microcontroller.
Blue Pill is powered by the powerful 32-bit STM32F103C8T6 ARM processor, clocked at 72MHz. The board operates on 3.3v logic levels but its GPIO pins have been tested to be 5v tolerant. While it does not come with WiFi or Bluetooth like the ESP32 and Arduino variants, it offers 20KB of RAM and 64KB of flash memory which makes it adequate for large projects. It also possesses 37 GPIO pins, 10 of which can be used for Analog sensors since they have ADC enabled, along with others which are enabled for SPI, I2C, CAN, UART, and DMA.The board accommodates two crystal oscillators — one 8MHz crystal and one 32KHz crystal — that can be used to drive an internal RTC (real-time clock). As a result, the MCU can operate in deep sleep mode, making it ideal for battery-powered applications.To program this board, we need to use a simple USB to UART converter, and then we can program it directly via USB from a computer.These boards are very cheap compared to the official Arduino board, and the hardware is open source.
- Model: STM32F103C8T6.
- Core: ARM 32 Cortex-M3 CPU.
- Debug mode: SWD.
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- On-board Mini USB interface, you can give the board power supply and USB communication.
- Size: 5.3cm x 2.2cm.