{"product_id":"ccpm-servo-tester-esc-consistency-tester-ppm-signal-generator-3-channel","title":"CCPM Servo Tester \/ ESC Consistency Tester \/ PPM Signal Generator (3-Channel)","description":"\u003cp data-path-to-node=\"5\"\u003eHoused in a lightweight, compact blue shell, this tester features three distinct operating modes Manual, Neutral, and Automatic selectable via a single push button. It is the absolute quickest way to find the exact dead-center of a servo before attaching mechanical arms, or to verify that three separate motors respond simultaneously without any jitter or lag. Running on a standard 4.8V to 6.0V DC input, it is a must-have workbench accessory that saves time and prevents you from installing faulty components into complex builds.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003e\u003cb data-path-to-node=\"6\" data-index-in-node=\"0\"\u003eKey Features \u0026amp; Functional Advantages\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"7\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,0,0\"\u003e\u003cb data-path-to-node=\"7,0,0\" data-index-in-node=\"0\"\u003e3-Channel Simultaneous Testing:\u003c\/b\u003e Features an output header that allows you to connect and drive up to three servos or ESCs at the exact same time, perfect for comparing reaction speeds and ensuring consistency across multiple parts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,1,0\"\u003e\u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"0\"\u003eThree Diagnostic Modes:\u003c\/b\u003e * \u003cb data-path-to-node=\"7,1,0\" data-index-in-node=\"26\"\u003eManual Mode:\u003c\/b\u003e Rotate the front dial to directly control the speed and position of the servo, testing its reaction time and checking for stripped internal gears.\u003c\/p\u003e\n\u003cul data-path-to-node=\"7,1,1\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,1,1,0,0\"\u003e\u003cb data-path-to-node=\"7,1,1,0,0\" data-index-in-node=\"0\"\u003eNeutral Mode:\u003c\/b\u003e Instantly snaps the connected servos back to their exact, factory-calibrated center position (1500µs), which is essential before mounting servo horns and mechanical linkages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,1,1,1,0\"\u003e\u003cb data-path-to-node=\"7,1,1,1,0\" data-index-in-node=\"0\"\u003eAutomatic \"Window Wiper\" Mode:\u003c\/b\u003e Sweeps the servo back and forth continuously across its maximum angle, allowing you to stress-test the motor or check for mechanical binding in your linkages.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,2,0\"\u003e\u003cb data-path-to-node=\"7,2,0\" data-index-in-node=\"0\"\u003eTransmitter-Free ESC Testing:\u003c\/b\u003e Plug your brushless Electronic Speed Controller directly into the tester to safely spin up and test your motors on the bench without binding an RC receiver.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,3,0\"\u003e\u003cb data-path-to-node=\"7,3,0\" data-index-in-node=\"0\"\u003eHighly Compact \u0026amp; Portable:\u003c\/b\u003e Weighing only 8 grams, it takes up practically no space in your toolbox or field repair kit.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"7,4,0\"\u003e\u003cb data-path-to-node=\"7,4,0\" data-index-in-node=\"0\"\u003eClear LED Indicators:\u003c\/b\u003e Bright onboard LEDs clearly indicate which of the three operating modes is currently active.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"8\"\u003e\u003cb data-path-to-node=\"8\" data-index-in-node=\"0\"\u003ePerfect For\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb data-path-to-node=\"9,0,0\" data-index-in-node=\"0\"\u003eRobotics Assembly:\u003c\/b\u003e The absolute best way to manually center the shoulder, elbow, and base servos of a robotic arm \u003ci data-path-to-node=\"9,0,0\" data-index-in-node=\"114\"\u003ebefore\u003c\/i\u003e you screw the structural brackets together.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb data-path-to-node=\"9,1,0\" data-index-in-node=\"0\"\u003eRC Drone \u0026amp; Plane Builders:\u003c\/b\u003e Testing the rotation direction and thrust of brushless motors using an ESC without needing to connect a flight controller or bind a radio.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,2,0\"\u003e\u003cb data-path-to-node=\"9,2,0\" data-index-in-node=\"0\"\u003eHardware Troubleshooting:\u003c\/b\u003e Quickly isolating a fault to figure out if a jittering robotic joint is caused by a broken servo, bad Arduino code, or a faulty receiver.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,3,0\"\u003e\u003cb data-path-to-node=\"9,3,0\" data-index-in-node=\"0\"\u003eHobbyist Workbench:\u003c\/b\u003e An incredibly affordable, everyday utility tool that speeds up prototyping and prevents the frustration of installing dead motors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"10\"\u003e\u003cb data-path-to-node=\"10\" data-index-in-node=\"0\"\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003eDevice Type:\u003c\/b\u003e CCPM Servo Tester \u0026amp; ESC Consistency Master\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003eInput Voltage:\u003c\/b\u003e 4.8 Volts to 6.0 Volts DC\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003eOutput Current:\u003c\/b\u003e ≤15mA (at 5.0V)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eOutput Signal Width:\u003c\/b\u003e 1.5ms ± 0.5ms (Standard PWM\/PPM servo signal)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,4,0\"\u003e\u003cb data-path-to-node=\"11,4,0\" data-index-in-node=\"0\"\u003eTesting Capacity:\u003c\/b\u003e Up to 3 Servos \/ ESCs simultaneously\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,5,0\"\u003e\u003cb data-path-to-node=\"11,5,0\" data-index-in-node=\"0\"\u003eControl Modes:\u003c\/b\u003e Manual (Dial), Neutral (Center), Automatic (Sweep)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,6,0\"\u003e\u003cb data-path-to-node=\"11,6,0\" data-index-in-node=\"0\"\u003eHousing Material:\u003c\/b\u003e Plastic\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,7,0\"\u003e\u003cb data-path-to-node=\"11,7,0\" data-index-in-node=\"0\"\u003eDimensions:\u003c\/b\u003e 46mm x 32mm x 17mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,8,0\"\u003e\u003cb data-path-to-node=\"11,8,0\" data-index-in-node=\"0\"\u003eWeight:\u003c\/b\u003e ~8 grams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"K-TECHNICS","offers":[{"title":"Default Title","offer_id":42882508128327,"sku":null,"price":300.0,"currency_code":"KES","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/7637\/2039\/files\/Servo_Tester.jpg?v=1781643026","url":"https:\/\/www.ktechnics.com\/products\/ccpm-servo-tester-esc-consistency-tester-ppm-signal-generator-3-channel","provider":"K-TECHNICS","version":"1.0","type":"link"}