14.8V 2200mAh 4S LiPo Battery (High-Discharge FPV & RC Power Pack)

The 14.8V 2200mAh 4S LiPo Battery is a highly specialized energy solution favored by RC pilots and roboticists who need massive burst power but are strictly limited by weight and center-of-gravity constraints. The "4S" configuration means this pack contains four 3.7V lithium-polymer cells wired in series. This provides a formidable nominal voltage of 14.8V (peaking at 16.8V when fully charged), resulting in significantly higher motor RPMs and torque compared to a standard 3S setup.

By keeping the capacity at 2200mAh, this battery strikes an optimal power-to-weight ratio. It weighs substantially less than a bulky 5000mAh pack, preserving the agile flight characteristics of aerobatic airplanes and freestyle drones while still providing enough high-voltage punch for vertical climbs and rapid acceleration. Built to handle heavy electrical loads, it typically features a high continuous discharge rating (35C to 60C+), thick silicone wiring, a heavy-duty XT60 main connector, and a 5-pin JST-XH balance lead for safe, equalized charging.

Key Features & Functional Advantages:

• Optimized Power-to-Weight Ratio: Weighing in at roughly 230 grams, this pack provides the aggressive 14.8V punch required for aerobatics without severely degrading the thrust-to-weight ratio of your aircraft.

• Explosive 4S Power: Delivers a nominal 14.8V, allowing compatible brushless motors to spin significantly faster and generate more thrust or torque than standard 11.1V systems.

• High C-Rating Performance: Engineered to sustain heavy, continuous burst currents, completely eliminating voltage sag during aggressive throttle punch-outs and heavy acceleration.

• Heavy-Duty Connectors: Equipped with industry-standard XT60 (or T-Deans) connectors and low-resistance silicone wire to ensure maximum power transfer from the battery to your ESC.

• Integrated Cell Balancing: Features a standard 5-pin JST-XH balance connector, allowing your programmable LiPo charger to perfectly synchronize the voltage across all four cells for maximum safety and pack longevity.

Perfect For:

• 5-Inch FPV Drones: An incredibly popular battery size for mid-weight 5-inch freestyle and racing quadcopters, offering an excellent balance of flight time and acrobatic agility.

• 3D RC Airplanes: The standard upgrade pack for 1000mm to 1200mm wingspan 3D aerobatic planes and fast-flying foam "warbirds" that require high RPMs for vertical pull-outs.

• Mid-Sized RC Vehicles: A great, lightweight 4S power source for compatible 1/10th scale rock crawlers and high-speed bashers where a larger 5000mAh pack physically won't fit in the battery tray.

• High-Voltage Robotics: Ideal for 14V-class combat robots and autonomous chassis that require high-torque bursts but need to keep their overall weight class as low as possible.

Technical Specifications:

• Battery Chemistry: Lithium Polymer (LiPo)

• Cell Configuration: 4S1P (4 Cells in Series, 1 in Parallel)

• Nominal Voltage: 14.8V

• Fully Charged Voltage: 16.8V (4.2V per cell)

• Nominal Capacity: 2200mAh (2.2 Amp-hours)

• Typical Discharge Rate (C-Rating): 35C to 60C Continuous (Varies by manufacturer)

• Main Power Connector: Typically XT60 or T-Deans (Verify before purchase)

• Balance Connector: 5-Pin JST-XH

• Approximate Dimensions: ~105 mm x 34 mm x 30 mm (L x W x H)

• Approximate Weight: ~220 to 240 grams

Ensure your order is placed by 2PM to guarantee next-day delivery! Our commitment to prompt service includes a 24-hour delivery system through our network of carriers, aimed at ensuring your package arrives right on schedule.

Please note, a delivery fee of €4.99 applies for orders under €50. For those in remote areas, be aware that our couriers may apply an extra surcharge. This additional fee helps cover the costs of transporting your items to harder-to-reach locations.